Advanced Technology Biomass Pellet Steam Generator
Product Introduction:
According to Article 1.3 of the Boiler Safety Technical Regulations of the People's Republic of China (T S G11-2020), the "scope of not applicable" provisions:
Design a steam boiler with normal water level water volume (such as a boiler without a fixed water and steam dividing line, the water volume is calculated according to the total geometric volume inside the inlet and outlet of the water and steam system, the same below) less than 30L, or the rated steam pressure is less than 0.1MPa; The design rated steam pressure of the micro-pressure furnace (hot steam furnace) produced by our company is less than 0.1MPa, which is not in the scope of supervision and inspection, and there is no need to go through the procedures of boiler approval and annual inspection.the use of biomass wood pellet fuel, energy saving 20-30% than gas, energy saving 50-60% than oil, energy saving 60-70% than electricity.
- The use of water, fire tube heat exchanger, heat exchange efficiency of up to 91%c,
- Flexible collocation, nearby installation, pipeline heat loss is small.
- Small footprint, no boiler room, no boiler workers, no annual inspection.
- Convenient and fast automatic control design, one-key opening and closing, intelligent electric control, automatic ignition, automatic control operation.
Product Feature:
Save Money:
- Biomass can save 20% energy than gas, 50% than oil, and 60% than electricity;
- Thermal efficiency higher than 85%;
- Start up and heat up quickly,Continuous steam can be released within 10 seconds after restarting, and it takes about 20 minutes from ignition to normal steam supply.
Intelligent:
- High degree of automation,intelligent ignition, electric control and fuel feeding;
- Quick start, turn on as needed, turn off when not in use.
Convenient:
- Compact structure,light weight and modular integrated design are convenient for relocation and installation, and convenient for use and maintenance;
- Multiple units can be used in parallel to meet large steam need;
- The silo has a large capacity, and one feeding can last for 5-10 hours;
Environmental Friendly:
- Integrated design of dust removal andwaste heat, no smoke and dust.
Technical Parameters:
Biomass Steam Generator Advantages:
1. Feeding system: there are double stage feeding system
The first stage is keep the feeding quantity, which will guarantee the reasonable fuel feeding.
The second stage is to keep that there is no extra fuel inside the feeding rod, which will make the boiler work in safety condition. Meanwhile, it will lower down the load of the feeding systems and avoid any problems.
2. Safety of the boiler
On the second feeding stage, there is spray device which will avoid any back fire problems. During combustion of the boiler, once there is some reason cause the back fire problem, when the temperature of second feeding stage have exceed 95 degree C, the boiler water will be spray to extinguish the fire automatically. Once the temperature lower than 90 degree C, the spray will closed automatically.
3. Control system
We take use of the digital control system which has changed the formal feeding mode( based on motor speed and the time control). We used the air sensor system to control the feeding systems. Based on the concentration of the environment air to control the feeding speed and quantity, which will make the boiler work always in stable condition.
4. Ignition and keep fire.
The ignition system make the boiler start at any time. For some big boilers, there is also keep firing system, which will keep the boiler firing all the time.
5. Maintenance jobs
You just open the boiler door to clean the dust once per week, that all. Because of the fully combustion, there will be very little dust left inside the furnace.
6. Duct of the boiler
Humanized design of the duct, you can connect very easily in different direction. which has reduce the elbow of the duct, and increase the flow rate of the air. Through this way the boiler will work stably.
7. Exhaust temperature
There is temperature sensor in the chimney to test the temperature. On that basis, the temperature will be displayed and you will check the exhaust heat temperature will be lower than 120dgree C.
8. Combustion of the boiler
Take use of the higher temperature ceramics combined material burner and different air feeding system, which will the fuel fully burnt. The highest temperature can achieve 1300 degree C, which will make the dust and gas become gasifying in short time.
9. Dust collecting system
There equip with the wet scrubber dust collector for the boiler. The dust collecting efficiency can be more than 99%. Almost all dust will be collected by the scrubber.
Application:
Biomass steam generator is used in industries below to support steam:
Washing ironing industry: dry washer, dryer and washing machine, dryer, ironing machine, electric iron, and other ancillary equipment.
Packaging machinery industry: labeling machine, marking machine.
Bio-chemical industry: fermentation tank, reactor, sandwich pot, blender, emulsifier and other supporting equipment
Food machinery industry: Tofu machine, steam box, sterilization tank, packaging machines, coating equipment, sub-mouth machines etc.
Other industries: (oil, automobile) steam cleaning industry (hotels, dormitories, schools, mixing station) hot water supply, (bridges, railways) concrete curing, (casual beauty club) sauna, the heat exchange equipment, etc.
The Advantages Of Using Biomass As Fuel:
1. High calorific value of fuel: biomass particles have high calorific value, and the calorific value is about 3,900-4800kcal /kg.
2. High purity fuel: the biomass particle fuel has high purity and does not contain any other impurities that will consume heat instead of heating, which will directly reduce the cost for the enterprise.
3. Long service life: biomass particle fuel does not contain sulfur and phosphorus, does not corrode the boiler, can extend the service life of the boiler.
4. Green energy clean environmental protection: the biomass particle fuel does not contain sulfur and phosphorus, does not produce sulfur dioxide and phosphorus pentoxide when burning, does not cause acid rain, does not pollute the environment.
FAQ:
Q1:Why choose Xingfu boiler?
A1: We are the professional direct manufacturer for the boilers with almost 20 years history, specializing in industry boilers. Our mission is to offer the best boiler solutions to a grand variety of industries like chemical, brewing, dry-cleaning, food, pharmaceutical, textile, gas and oil, heating and others. We have excellence service and earned good reputation.
Q2: If the boiler works wrong, how to repair it?
A2: We have professional aftersale service team, when receiving your problem feedback, we will send our engineers to your country and solve your problems as soon as possible.
Q3: Can we get installation?
A3: Yes, we will send 1-2 engineer to guide you installation and operation.
Q4: How long should we wait for delivery?
A4: In 15 days after received the deposit.
Q5: How can I get the Boiler PRICE LIST?
A5: Tell me those Details as below for provide you a right competitive Price:
1. The Capacity and Pressure you need
2. The Application/Usage of the Boiler
3. The Fuel( biomass, gas & oil, electricity or others)
Company Profile:
Qingdao Xingfu Energy Equipment Co. , Ltd. It is specialized in manufacturing A level Boilers, company offer a wide range of products to meet your various needs. The company' s main products include: electric steam generator, oil (gas) steam generator, biomass hot water boiler, biomass hot air stove, pelletizer ang other products. Inspection and Quarantine of the People' s Republic of China.
Audited Supplier 
){kind=link}