Home Small Steam Boilers Biomass Steam Generator 700kg/H
Biomass small steam generator according to the provisions of boiler safety technical supervision regulations.The system volume is smaller than the defined volume of the boiler, and there is no need to go through the procedures of boiler approval and annual inspection, with high efficiency and energy saving.A. biomass wood pellet fuel is used, which can save 20-30% energy than gas, 50-60% energy than oil and 60-70% energy than electricity.B. Adopting water and fire tube heat exchanger, heat exchange efficiency is up to 93%.C. Flexible assembly, nearby installation and small heat loss of pipelines.D. small floor space, no boiler room, no boiler workers, no annual inspection.Convenient and fast, automatic design, one key open and close, intelligent control, automatic ignition, automatic operation.
Main Features:
Proper design: the vertical pipe structure facilitates heating transfer and the heating efficiency meets the related national standard. The boiler furnace is designed to decrease the expansion force and enlarge the heated surface.
Highly pure: the dryness percent of steam capacity is above 96%.
Safe and reliable: the boiler is installed with multiple safety control system, including pressure, temperature,and water level. Slight pressure operation,with no backfire and flame lifting
Fully automatic :The automatic product control system can realize cluster control and easy operation,and only one operator is needed.
Highly efficient: the usage of reproducible biomass energy is of low cost, reducing operating cost by 30-60% compared with oil (gas).
Low-carbon: low soot, sulphur and nitrogen emission,and the carbon dioxide emission meets the standard of GB13271.
Biomass Steam Generator Advantages
1.Feeding system: there are double stage feeding system,
The first stage is keep the feeding quantity, which will guarantee the reasonable fuel feeding.
The second stage is to keep that there is no extra fuel inside the feeding rod, which will make the boiler work in safety condition. Meanwhile, it will lower down the load of the feeding systems and avoid any problems.
2.Safety of the boiler
On the second feeding stage, there is spray device which will avoid any back fire problems. During combustion of the boiler, once there is some reason cause the back fire problem, when the temperature of second feeding stage have exceed 95 degree C, the boiler water will be spray to extinguish the fire automatically. Once the temperature lower than 90 degree C, the spray will closed automatically.
3.Control system
We take use of the digital control system which has changed the formal feeding mode( based on motor speed and the time control). We used the air sensor system to control the feeding systems. Based on the concentration of the environment air to control the feeding speed and quantity, which will make the boiler work always in stable condition.
4.Ignition and keep fire.
The ignition system make the boiler start at any time. For some big boilers, there is also keep firing system, which will keep the boiler firing all the time.
5.Maintenance jobs"
You just open the boiler door to clean the dust once per week, that all. Because of the fully combustion, there will be very little dust left inside the furnace.
6.Duct of the boiler
Humanized design of the duct, you can connect very easily in different direction.which has reduce the elbow of the duct, and increase the flow rate of the air. Through this way the boiler will work stably.
7.Exhaust temperature
There is temperature sensor in the chimney to test the temperature. On that basis, the temperature will be displayed and you will check the exhaust heat temperature will be lower than 120dgree C.
8.Combustion of the boiler
Take use of the higher temperature ceramics combined material burner and different air feeding system, which will the fuel fully burnt. The highest temperature can achieve 1300 degree C, which will make the dust and gas become gasifying in short time.
9.Dust collecting system
There equip with the wet scrubber dust collector for the boiler. The dust collecting efficiency can be more than 99%. Almost all dust will be collected by the scrubber.
Application Scope:
Biomass steam generator is used in industries below to support steam and hot water:
- Washing ironing industry: dry washer, dryer and washing machine, dryer, ironing machine, electric iron, and other ancillary equipment.
- Packaging machinery industry: labeling machine, marking machine.
- Bio-chemical industry: fermentation tank, reactor, sandwich pot, blender, emulsifier and other supporting equipment
- Food machinery industry: Tofu machine, steam box, sterilization tank, packaging machines, coating equipment, sub-mouth machines etc.
- Other industries: (oil, automobile) steam cleaning industry (hotels, dormitories, schools, mixing station) hot water supply, (bridges, railways) concrete curing, (casual beauty club) sauna, the heat exchange equipment, etc.
Biomass fuel:
Audited Supplier 
){kind=link}