200kg/h Automatic Safety Biomass Steam Generator
Product Introduction:
Biomass small steam generator according to the provisions of boiler safety technical supervision regulations. The system volume is smaller than the defined volume of the boiler, and there is no need to go through the procedures of boiler approval and annual inspection, with high efficiency and energy saving. A. biomass wood pellet fuel is used, which can save 20-30% energy than gas, 50-60% energy than oil and 60-70% energy than electricity. B. Adopting water and fire tube heat exchanger, heat exchange efficiency is up to 93%.C. Flexible assembly, nearby installation and small heat loss of pipelines. D. small floor space, no boiler room, no boiler workers, no annual inspection. Convenient and fast, automatic design, one key open and close, intelligent control, automatic ignition, automatic operation.
Product Feature:
One. Energy saving
1. Fast start and temperature rise: continuous air can be discharged within 10 seconds after restart, and about 20 minutes from ignition to normal air supply.
2. can be used to produce different pressure of high temperature steam, to meet the ironing, cleaning equipment and other purposes. The gas production can be flexibly adjusted with the field gas production, so as to ensure the maximum effective utilization of gas production and save resources.
Second. The smart
1, high degree of automation, fast start, with the use of the open, not immediately stop.
2. Automatic control of pressure, water level, feed and combustion, etc.
Three. Convenient
1. compact structure, clean appearance, light weight, modular integration design, easy to move installation, easy to use and maintenance.
2. multiple sets can be used in parallel, to meet a large number of gas.
3. The storage bin has large capacity and can run continuously for 5-8 hours at a time.
Four. The environmental protection
Dust removal and waste heat integrated design, smokeless and dust-free.
Five. There is no need to apply for a certificate
Biomass small steam generator according to the provisions of boiler safety technical supervision regulations. The defined volume of steam boiler with water volume less than 30 liters of the system is not within the scope of boiler safety supervision, and there is no need to apply for boiler approval and annual inspection.
Technical Parameters:
| Model |
Unit |
LSS-0.2-0.7-SW |
| Rated evaporation power |
Kg/h |
200 |
| Pressure of work |
Mpa |
0.6 |
| Use of fuel |
SW |
Biomass pellet |
| Water capacity |
<30L |
| Induced draft fan power |
W |
550 |
| Blower power |
W |
120 |
| feed motor power |
W |
250 |
| water pump power |
W |
750 |
| Power consumption |
Kw/h |
1.67 |
| Heat efficiency |
% |
93 |
| Fuel consumption |
Kg/h |
29 |
| Safe valve |
Mpa |
0.68 |
| Drain valve |
|
1 inch |
| Water inlet diameter |
|
0.5 inch |
| Steam outlet diameter |
|
1 inch |
| Boiler size(L*W*H) |
mm |
1850×750×1700 |
| Dust collection size |
mm |
Φ550×1455 |
| Transport weight |
kg |
980 |
Biomass Steam Generator Advantages:
1.Feeding system: there are double stage feeding system
The first stage is keep the feeding quantity, which will guarantee the reasonable fuel feeding.
The second stage is to keep that there is no extra fuel inside the feeding rod, which will make the boiler work in safety condition. Meanwhile, it will lower down the load of the feeding systems and avoid any problems.
2.Safety of the boiler
On the second feeding stage, there is spray device which will avoid any back fire problems. During combustion of the boiler, once there is some reason cause the back fire problem, when the temperature of second feeding stage have exceed 95 degree C, the boiler water will be spray to extinguish the fire automatically. Once the temperature lower than 90 degree C, the spray will closed automatically.
3.Control system
We take use of the digital control system which has changed the formal feeding mode( based on motor speed and the time control). We used the air sensor system to control the feeding systems. Based on the concentration of the environment air to control the feeding speed and quantity, which will make the boiler work always in stable condition.
4.Ignition and keep fire.
The ignition system make the boiler start at any time. For some big boilers, there is also keep firing system, which will keep the boiler firing all the time.
5.Maintenance jobs
You just open the boiler door to clean the dust once per week, that all. Because of the fully combustion, there will be very little dust left inside the furnace.
6.Duct of the boiler
Humanized design of the duct, you can connect very easily in different direction. which has reduce the elbow of the duct, and increase the flow rate of the air. Through this way the boiler will work stably.
7.Exhaust temperature
There is temperature sensor in the chimney to test the temperature. On that basis, the temperature will be displayed and you will check the exhaust heat temperature will be lower than 120dgree C.
8.Combustion of the boiler
Take use of the higher temperature ceramics combined material burner and different air feeding system, which will the fuel fully burnt. The highest temperature can achieve 1300 degree C, which will make the dust and gas become gasifying in short time.
9.Dust collecting system
There equip with the wet scrubber dust collector for the boiler. The dust collecting efficiency can be more than 99%. Almost all dust will be collected by the scrubber.
Application:
Biomass steam generator is used in industries below to support steam and hot water:
Washing ironing industry: dry washer, dryer and washing machine, dryer, ironing machine, electric iron, and other ancillary equipment.
Packaging machinery industry: labeling machine, marking machine.
Bio-chemical industry: fermentation tank, reactor, sandwich pot, blender, emulsifier and other supporting equipment
Food machinery industry: Tofu machine, steam box, sterilization tank, packaging machines, coating equipment, sub-mouth machines etc.
Other industries: (oil, automobile) steam cleaning industry (hotels, dormitories, schools, mixing station) hot water supply, (bridges, railways) concrete curing, (casual beauty club) sauna, the heat exchange equipment, etc.
The advantages of using biomass as fuel:
1. High calorific value of fuel: biomass particles have high calorific value, and the calorific value is about 3,900-4800kcal /kg.
2. High purity fuel: the biomass particle fuel has high purity and does not contain any other impurities that will consume heat instead of heating, which will directly reduce the cost for the enterprise.
3. Long service life: biomass particle fuel does not contain sulfur and phosphorus, does not corrode the boiler, can extend the service life of the boiler.
4. Green energy clean environmental protection: the biomass particle fuel does not contain sulfur and phosphorus, does not produce sulfur dioxide and phosphorus pentoxide when burning, does not cause acid rain, does not pollute the environment.
FAQ:
Company Profile:
Qingdao Xingfu Energy Equipment Co. , Ltd. It is specialized in manufacturing A level Boilers, company offer a wide range of products to meet your various needs. The company' s main products include: electric steam generator, oil (gas) steam generator, biomass hot water boiler, biomass hot air stove, pelletizer ang other products. Inspection and Quarantine of the People' s Republic of China.
Audited Supplier 
){kind=link}
){kind=link}