Customization: | Available |
---|---|
Function: | Thermal Oil Boiler |
Fuel: | Gas-Fired |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
The thermal oil boiler adopts circulating pump to press the oil circular flow inside boiler, and transfer the heat to other equipment, and when the heat was released, the fluid oil will back into heater through circulating pump to absorb heat and re-transfer the heat to other equipment, in this cyclic operation, the thermal oil boiler finish heat transfer.Industrial using application: asphalt industry, rubber industry, lubricant industry, chemical industry, food industry, oil industry, drying and other industries, etc.
Main Technology Application
1. It adopts a wet-back internal combustion two-pass structure, and the top of the boiler is equipped with a top coil, which effectively prevents the flame from directly radiating to the rear wall. At the same time, under the premise of a compact structure, it increases the radiation heating area and improves the thermal efficiency of the boiler.
2. The use of micro-positive pressure operation effectively improves the combustion intensity of the furnace, makes the volume of the boiler with the same capacity smaller, eliminates the air leakage of the boiler furnace and flue, and improves the thermal efficiency of the boiler.
3. Adopt advanced EDA technology to calculate the size of the furnace body and the flow rate of flue gas in detail, and make full use of flame and flue gas heat exchange to ensure reliable operation and sufficient cooling of the boiler, and improve the thermal efficiency of the boiler.
4. The high-efficiency condensation technology is adopted to effectively reduce the exhaust gas temperature and improve the thermal efficiency of the boiler.
5. Reasonable structural design and excellent refractory and heat preservation materials are adopted to greatly reduce the external temperature of the furnace body, making the external temperature lower than 50 degrees (higher than the national standard), reducing heat loss and improving the thermal efficiency of the boiler.
6. It adopts a new design to reduce the emission of harmful substances during fuel combustion and meet the national environmental protection standards, especially to reduce the emission of nitrogen oxides and meet the national low nitrogen emission standards.
7. Imported burners of many well-known international brands are used to adapt to various application scenarios, ensuring quality and safety.
8. Adopt PLC and other automation controllers of international brands such as Siemens as the control core, and also use peripheral components of international brands to realize a high-quality fully automatic control system, which can collect various import and export temperatures, pressures, etc. in real time. The parameters are displayed centrally in the control cabinet in real time. Through the closed-loop control system such as PID, the boiler is guaranteed to work stably under various parameters set by the user. At the same time, the working range of the data is monitored, and various abnormalities are reminded or alarmed, which is convenient for users. use and maintenance. The control module also has powerful expansion capabilities, and can conveniently realize various in-depth applications such as group control and remote control according to customer needs.
Product model detail code: YY(Q)W- Rated heating capacity (KW) Y(Q) | |||||||||||
Rated heating capacity | KW | 120 | 240 | 350 | 500 | 700 | 1000 | 1200 | 1400 | 2000 | 2400 |
X104Kcal/h | 10 | 20 | 30 | 40 | 60 | 80 | 100 | 120 | 160 | 200 | |
Thermal efficiency(≥%) | Y | 96.10 | 96.09 | 96.28 | 96.27 | 96.02 | 96.00 | 96.06 | 95.03 | 96.07 | 96.06 |
Q | 98.05 | 98.04 | 98.23 | 98.20 | 98.53 | 98.52 | 98.16 | 98.53 | 98.55 | 98.50 | |
Design pressure (MPa) | 1.1 | ||||||||||
Maximum temperature of medium (ºC) | 320 | ||||||||||
Circulating oil flow rate (m3/h) | 12.5 | 18 | 30 | 30 | 60 | 80 | 100 | 100 | 160 | 160 | |
Oil content of furnace (m3) | 0.09 | 0.12 | 0.29 | 0.38 | 0.52 | 0.57 | 0.74 | 0.92 | 1.55 | 1.77 | |
Pipe connection inner diameter (DN) | 50 | 50 | 65 | 65 | 100 | 100 | 150 | 150 | 150 | 150 | |
Total system installed capacity (KW) | 4.7 | 7.2 | 9.5 | 9.8 | 17.6 | 18.0 | 25.7 | 26.5 | 41.0 | 53.5 | |
Dimensions of transport(mm) | L | 2180 | 2514 | 2769 | 3250 | 3540 | 3764 | 4374 | 5410 | 5640 | 5560 |
W | 1290 | 1320 | 1650 | 1690 | 1710 | 1810 | 1810 | 1810 | 2022 | 2254 | |
H | 1575 | 1575 | 1993 | 2082 | 1880 | 2291 | 2321 | 2321 | 2480 | 2700 | |
Total weight of equipment(Kg) | 1550 | 1632 | 2745 | 3146 | 3771 | 4496 | 4993 | 5680 | 7700 | 8765 | |
Rated heating capacity | KW | 3000 | 3500 | 4100 | 4700 | 6000 | 7000 | 8200 | 9300 | 12000 | --- |
X104Kcal/h | 250 | 300 | 350 | 400 | 500 | 600 | 700 | 800 | 1000 | --- | |
Thermal efficiency(≥%) | 96.00 | 96.10 | 96.01 | 96.20 | 96.18 | 96.17 | 92.98 | 96.06 | 96.11 | --- | |
98.02 | 98.03 | 98.06 | 98.07 | 98.04 | 98.08 | 92.15 | 98.39 | 98.05 | --- | ||
Design pressure(MPa) | 1.1 | ||||||||||
Maximum temperature of medium(ºC) | 320 | ||||||||||
Circulating oil flow rate(m3/h) | 180 | 200 | 250 | 250 | 350 | 400 | 350 | 500 | 600 | --- | |
Oil content of furnace(m3) | 1.96 | 3.78 | 4.61 | 5.70 | 7.40 | 8.35 | 9.50 | 10.20 | 13.30 | --- | |
Inner diameter of piping connection(DN) | 150 | 200 | 200 | 250 | 250 | 250 | 300 | 300 | 300 | --- | |
Total installed capacity of the system(KW) | 77.2 | 87.2 | 111.7 | 120.2 | 164.2 | 165 | 202 | 198 | 200 | --- | |
Dimensions of transport(mm) | L | 6194 | 6674 | 7456 | 7742 | 8990 | 9441 | 10484 | 10966 | --- | |
W | 2254 | 2610 | 2807 | 3240 | 3406 | 3390 | 3560 | 3610 | --- | ||
H | 2700 | 3150 | 3402 | 3860 | 4117 | 4107 | 4230 | 4280 | --- | ||
Total weight of equipment(Kg) | 10267 | 16743 | 17446 | 20669 | 29682 | 32311 | 34640 | 36852 | 49380 | --- | |
Note 1. All the above values are calculated based on the low heat value of 8400kcal/Nm for natural gas and 10250kcal/kg for diesel. Note 2. Due to the need of continuous improvement, the company reserves the right to modify the appearance and size specifications, the above parameters are for reference only, please refer to the final drawing. Note 3. Y: fuel oil Q: gas |
Qingdao Xingfu Energy Equipment located at, Qingdao city, is founded in 2010, is a traditional and deeply accumulation& innovation high-tech enterprise in Shandong province. The company Specializes in researching, developing, designing, manufacturing, and selling industrial boilers, pressure vessels, waste tires & plastics pyrolysis system, biomass burners, biomass gasification, etc.
Xingfu Energy has strong R&D Strength. It has 78 technicians(21% of workers), 28 engineers(58% of technicians), 136skilled workers(59% of workers), 65qualified welders(47% of skilled workers). It covers an total area of 70500 square meters, including 21000 square meters plant area and 228 workers. From the year of 2012, our domestic sales revenue has broken through 100 million RMB. Now our company has passed the certificates of CE and ISO9001 quality management system, third measurement of units, and possessed B levels boiler maker, first& second pressure vessel licenses and installation boiler license by Qingdao Municipal Bureau of Labor.
Xingfu Energy products have been exported to more than 30 different countires, such as Mongolia, Indonesia, Korea, Malaysia, Polan, Spain, etc. All our products have gained highly reputation from our customers.
Q1: How quickly can you get the best price?
(1) We need to know the capacity of the boiler, the fuel you plan to use and your steam pressure needs, then we can confirm the
boiler model.
(2) Customers need to provide us with your name, email address and company name, then we will send you the price list immediately.
Moreover, if you use whatsapp, skype or wechat, then you can provide us your ID, which will be more convenient for us to
communicate.
Q2: Why choose us?
(1)Class A boiler production qualification factory with many years export experience
(2)100% steel plate, steel pipe, welding rod without damage;
(3)100% x-ray inspection (welds): ensure the quality of the whole boiler;
(4) Water pressure test: to ensure standard working pressure and safety;
Q3: What is the service life of your boiler?
A: UsuallyWith proper operation and good maintenance, the boiler can last for more than 20 years
Q4: Can I have my own customized products?
A: Of course you can, your customized requirements for colors, logos, designs, packaging, carton marking, language brochures, etc.
can all be met.
Dear friends, you can contact us through my contact form or send us your inquiry directly. Click on "Send Inquiry" or "Chat Now"!