Automatic Efficient 500kg/H Gas Fired Steam Generator for Pharmaceutical Factory
Product introduction:
Gas steam generator has the advantages of simple control process, high precision, high thermal efficiency, short preheating time, circular arc tube structure, etc., making the cold and heat exchange uniform and reaching the set pressure at a high speed. Steam pressure can reach 0.4mpa within 5-8 minutes after starting. The button start button control can set up to 4 automatic start operation cycles. The equipment is equipped with automatic water injection, pressure control, water shortage protection and alarm, very low water level automatic shutdown, overpressure protection, overpressure relief valve and other protective measures. Adopt tubular feed water and built-in steam and water separation output device, with corrosion resistance and throttling quality protection output.
The gas steam generator can generate steam continuously in a short time, output steam stably for 5 minutes in cold water state, and provide steam for 1 second in hot water state. The patented retarder will not show obvious pressure fluctuation in the process of water supply. It shortens working hours and improves working efficiency.
Technical Parameters:
| Model |
Unit |
SZS0.5-0.7-Y(Q) |
| Rated steam capacity |
kg/h |
500 |
| Rated pressure |
Mpa |
0.7 |
| Steam temperature |
ºC |
165 |
| Water capacity |
L |
49.6 |
| Design thermal efficiency |
90% |
| Steam outlet |
DN |
DN40 |
| Chimney diameter |
mm |
Φ220 |
| Motor power |
kw/h |
2.2 |
| Product size |
mm |
2190*1000*1990 |
| Weight |
kg |
1500 |
| Fuel consumption |
0#Diesel oil |
kg/h |
32 |
| |
Nature gas |
Nm³/h |
39 |
| |
Liquid gas |
Nm³/h |
15 |
Technical information :
1.Take use of the three pass and wet back design, the burning furnace is used the corrugated furnace and with lower layer design. The radiation heating area has been enlarged and boiler working efficiency has been increased.
2.Heating transfer tube use the threat tube. The tubes are assembled in the two sides of the boiler, which prolong the heating stroke and increase the convection heating area. The high temperature air under constant flow. The design has clean the tube itself and strengthen the heat transfer.
3.Enough steam space design, equip with inner oil and water separator, the moisture of the steam is lower than 3%. Digital and intelligent control system can monitor the whole burning process and make the whole operation under safety.
4.Boiler equip with all necessary auxiliaries, including the water level control, pressure control, alarm device, anti gas leakage, stop fire protection, over temperature and pressure protection , anti explosion protection, etc. The multiple and chain protection to make the boiler no hidden danger.
Product features:
1. Three backstroke water pipe structure, large heating area, high efficiency.
2. Equipped with an integrated level 2 high efficiency waste heat recovery device, the water inlet is heated by the level 2 waste heat recovery device and then enters the furnace, with higher efficiency;
3. Large heat transfer area.Sufficient steam production, high steam quality.
4. Equipped with microcomputer LCD control system, one-key operation, water and electricity installed in place, press the key, the generator will enter the automatic operation state, safe and simple, no need for professional furnace personnel, reduce the labor intensity of personnel;
5. The product is equipped with high-quality pressure controller, safety valve, with multiple protection, such as overpressure, low water level and overheating protection, to ensure product quality and use safety;
6. The whole machine factory, has been equipped with water pump, electromagnetic valve or one-way valve, just connect the power supply, steam pipe, water inlet and sewage pipe, saving the installation cost and a lot of installation materials.
7. The whole machine modular factory, small size, less than 2 tons of steam boiler can be used in this generator modular replacement.
Application:
Products are widely used in garment factories, dry cleaners, washing factories to iron and dry, steam rice, boil water, hospital, school, chemical plant disinfection, laboratory, pharmaceutical factory, food factory drying and disinfection heating, cooking soy milk, heating food;Supporting fermentation tank, reaction kettle, reaction pot sandwich pot, steamed rice cabinet.
FAQ:
Company Production Introduction:
Audited Supplier 
){kind=link}